10+ years old, but still look ok from a distance. NOT NEW OR MINT. No cracks, no welds, alloys will balance-up fine. PCD: 4 x 100 mm. Center bore: 63.3mm. + 4 x free spigot rings of 56.6mm. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2 TDI. BMW series 3 (E30). CHEVROLET Aveo, Spark (not…
Approx 10 years old, but still look fresh. Please expect some signs of use etc – NOT NEW OR MINT! Center caps are home-made. They have no clips so have been glued to the alloys. No cracks, no welds, alloys will balance-up fine. PCD: 4 x 100 mm. Center bore: 63.4mm. + 4 x free spigot rings of 57.1mm. 2 front allloys are 7.5J wide + offset ET35. 2 rear…
10+ years old, but still look ok. Please expect signs of use = FAR FROM NEW! Center caps are home-made. They have no clips so have been glued to the alloys. No cracks, no welds, alloys will balance-up fine. PCD: 4 x 100 mm. Center bore: 60.1mm. If you’re not sure what size you need – feel free get in touch with me. RETRO WHEELS B HUS is based in…
Approx 15 years old, but still look ok from a distance. Please expect signs of previous resprays + resprayed grinding. FAIR TO POOR CONDITION! Checked on balancing machine: all 4 alloys will balance-up fine. PCD: 4 x 100 mm. Center bore: approx 67mm. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2 TDI. BMW series 3…
10+ years old, but still look ok. Please expect signs of use = NOT NEW! No cracks, no welds, alloys will balance-up fine. BORBET C TWINS! PCD: 4 x 100 mm. If you’re not sure what size you need – feel free get in touch with me. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2…
No cracks, no welds, will balance-up fine. 10+years old – NOT NEW, but still look impressive. PCD: 4 x 100 mm. Center bore: 60.1mm. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2 TDI. BMW series 3 (E30). CHEVROLET Aveo, Spark (not all models). DAEWOO Espero, Kalos, Lanos, Nexia, Nubira J200. DAIHATSU Applause, Charade, Cuore, Grand…
Approx 15 years old, but still look ok from a distance. Please expect signs of previous resprays + resprayed grinding. FAIR TO POOR CONDITION! Checked on balancing machine: all 4 alloys will balance-up fine. PCD: 4 x 100 mm. Center bore: approx 67mm. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2 TDI. BMW series 3…
Approx 10 years old, but still look fresh. Please expect some signs of use & cracks to paint (not metal). 1 front alloy with a flat spot to the front lip (BALANCED-UP FINE). No cracks, no welds, alloys will balance-up fine. PCD: 4 x 100 mm. Center bore: 63.4mm. + 4 x free spigot rings of 57.1mm. 2 front allloys are 7.5J wide + offset ET35. 2 rear alloys are…
Approx 20 years old, but still look ok from a distance. Please expect signs of use & grinding. WOULD BENEFIT FROM PROPER REFURB. No cracks, no welds, alloys will balance-up fine. PCD: 4 x 100 mm. 1 alloy is slightly deeper dished. 3 x OFFSET ET: 37. 1 x OFFSET ET:25. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should…
Over 20 years old – ASKING FOR REFURB! No cracks, no welds, alloys will balance-up fine. PROPER DEEP DISH! PCD: 4 x 100 mm. LOW OFFSET ET: 25. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2 TDI. BMW seria 3 (E30). CHEVROLET Aveo, Spark (not all models). DACIA Dokker, Dokker Van, Lodgy, Logan, Logan MCV,…