Renault Grand Scenic

ATL LICHTMASCHINE GENERATOR 110 A DACIA DUSTER LOGAN RENAULT GRAND SCENIC MEGANE. 1x ATL Autotechnik Generator L82550. PASST AN FOLGENDEN FAHRZEUGEN. TECHNISCHE INFORMATION Artikelnummer : L 82 550 Hersteller : ATL Autotechnik Produkttyp : Generator Eigenschaften Spannung 14V, Bordnetzausführung für Fahrzeuge mit 12V Bordnetz, Generator-Ladestrom 110A, Rippenanzahl 6, Lage/Grad R 90, Riemenscheiben-Ø 56,5mm, Drehrichtung Drehrichtung im Uhrzeigersinn, Steckerausführung-ID B+ L DFM, Es handelt sich bei dieser Lichtmaschine um ein NEUTEIL,…

LuK Kupplung Dacia Nissan Renault 1,5 dCi. Siehe technische Informationen und Fahrzeugtabelle. Kupplungssatz: Ø: 230, Ergänzungsartikel/Ergänzende Info 2: ohne Ausrücklager, Ergänzungsartikel/Ergänzende Info 2: Zweimassenschwungrad prüfen und ggf. Im Bereich der Kupplungen ist LuK (“Lamellen- und Kupplungsbau”) Erstausrüster fast aller Automobilhersteller. Hohe technische Kompetenz, hervorragende Qualität und die kontinuierliche Entwicklung innovativer Lösungen zeichnen das Unternehmen aus. Pkw-Kupplungen Kupplungskomponenten müssen heute eine Vielzahl von Anforderungen erfüllen, die einen bedeutenden Einfluss auf das…

Approx 10 years old – WOULD BENEFIT FROM REFURB. But still look ok (as per pictures). Please expect signs of use & white spots to the polished parts. No cracks, no welds, alloys will balance-up fine. PCD: 4 x 100 mm. + 4 x free sigot rings of 56.6mm (vauxhall etc). RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should…

No cracks, no welds, will balance-up fine. 10+years old – NOT NEW, but still look impressive. Alutec center caps covered with OZ stickers. PCD: 4 x 100 mm. Center bore: 63.3mm. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2 TDI. BMW series 3 (E30). CHEVROLET Aveo, Spark (not all models). DAEWOO Espero, Kalos, Lanos, Nexia,…

Genuine OZ ITALY product. 10+ years old, but still look ok. No cracks, no welds, alloys will balance-up fine. Center caps are tatty. PCD: 4 x 100 mm. Center bore: 60.1mm. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. CHEVROLET Aveo, Spark (not all models). DAEWOO Espero, Kalos, Lanos, Nexia, Nubira J200. DAIHATSU Applause, Charade, Cuore, Grand Move,…

Approx 10 years old, but still look impressive. Please expect some signs of use. No cracks, no welds, alloys are straight. Alutec center caps covered with OZ stickers. PCD: 4 x 100 mm. Center bore: 63.3mm. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2 TDI. BMW series 3 (E30). CHEVROLET Aveo, Spark (not all models)….

No cracks, no welds, will balance-up fine. 10+years old – NOT NEW, but still look impressive. PLEASE EXPECT SIGNS OF USE – NOT NEW! PCD: 4 x 100 mm. Center bore: 63.3mm. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2 TDI. BMW series 3 (E30). CHEVROLET Aveo, Spark (not all models). DAEWOO Espero, Kalos, Lanos,…

20+ years old, but still look ok. NOT NEW OR MINT. No cracks, no welds, alloys will balance-up fine. PCD: 4 x 100 mm. Center bore: 63.4mm. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2 TDI. BMW series 3 (E30). CHEVROLET Aveo, Spark (not all models). DAEWOO Espero, Kalos, Lanos, Nexia, Nubira J200. DAIHATSU Applause,…

10+ years old, but still look ok as have been resprayed recently (as per pictures). Stud pattern PCD: 4x100mm. OFFSET / ET: 30. No cracks, 1 weld. Center caps are covered with BORBET stickers. 2 front alloys are straight. 2 rear alloys have 1 flat spot each, to the front lip. Based on my experience, all 4 will balance-up fine. RETRO WHEELS B HUS is based in Leeds, West Yorkshire….

Approx 15 years old, but still look ok from a distance. Please expect signs of previous resprays + resprayed grinding. FAIR TO POOR CONDITION! Checked on balancing machine: all 4 alloys will balance-up fine. PCD: 4 x 100 mm. Center bore: approx 67mm. Part worn 4-5mm treads. RETRO WHEELS B HUS is based in Leeds, West Yorkshire. Parcels are shrink-wrapped and well secured. These alloys should fit. AUDI A2 1.2…